BUNDLE OF FUN BOF3D105 Ptfe Tubes Prusa Printer Pack I3 MK3S 44.3MM

( Brand: Bundle Of Fun ), ( Part Type: Tube Printer ), ( Manufacturer Part Number: BOF3D105 )

Review BUNDLE OF FUN Replacement Ptfe Tubes Prusa I3 Printer 44.3mm Pack

Introducing the BOF3D PTFE Tubing, specifically designed for use with the Prusa i3 Mk3s 3D printer. These tubes are an essential upgrade for your printer's cooling system, ensuring optimal performance and improved print quality.

Measuring 44.3mm in length, these tubes are perfectly suited for the Prusa i3 Mk3s. Made from high-quality PTFE material (Polytetrafluoroethylene), also known as Teflon, these tubes offer several advantages over traditional PLA or ABS tubing. PTFE tubing is known for its exceptional chemical resistance, making it highly resilient to the harsh conditions of a 3D printing environment. It is alsoflexible, allowing for easy installation and maneuverability around tight corners and complex printer setups.

The BOF3D PTFE Tubing is reinforced with a braided stainless steel mesh, which provides an additional layer of protection against abrasion and damage during printing. The mesh also ensures that any residual pressure within the tubing is effectively dissipated, preventing potential leaks or damage to the cooling system.

This pack contains three 44.3mm PTFE tubes, providing you with an ample supply for various cooling system applications on your Prusa i3 Mk3s printer. The tubing is designed with a standard 5mm outer diameter and 3mm inner diameter, ensuring a perfect fit with most cooling fans and water coolers used in the Prusa i3 Mk3s community.

Upgrading to BOF3D PTFE Tubing not only enhances the functionality and reliability of your Prusa i3 Mk3s cooling system but also contributes to a cleaner and more aesthetically pleasing printing environment. The tubing's smooth, non-porous surface resists the buildup of printing residue and is easier to clean compared to traditional tubing materials.

In summary, the BOF3D PTFE Tubing is a must-have upgrade for your Prusa i3 Mk3s printer. Its superior chemical resistance, flexibility, and durability make it an essential component for maintaining optimal cooling system performance and ensuring consistent print quality. With this pack of three 44.3mm tubes, you'll have the perfect solution for your cooling system needs.

PTFE (Polytetrafluoroethylene) tubing, also known as Teflon tubing, is a popular choice for printing hot ends in 3D printing due to its excellent thermal and chemical resistance properties. For a Prusa i3 MK3S printer, using PTFE tubing for the hot end can offer several advantages and disadvantages.

1. Superior thermal resistance: PTFE tubing can withstand high temperatures, making it an ideal choice for hot end applications. This material can help ensure consistent temperature control and reduce the risk of thermal degradation.

2. Chemical resistance: PTFE tubing is resistant to various chemicals, including acids and bases, which can be beneficial for users working with a diverse range of filaments.

3. Low coefficient of friction: PTFE tubing has a low coefficient of friction, which can help improve the flow rate of melted filament through the hot end.

1. Cost: PTFE tubing is generally more expensive than other tubing materials such as PLA or PETG. However, the benefits it offers in terms of thermal and chemical resistance can make it a worthwhile investment for serious 3D printing enthusiasts.

2. Lack of flexibility: PTFE tubing is less flexible than other materials, which can make it more challenging to install and remove. This can be a concern for users who need to frequently disassemble their hot end or print with various nozzle sizes.

3. Brittleness: PTFE tubing can be brittle and prone to cracking if it is bent too sharply or subjected to extreme force. This can lead to leaks and require replacement.

The decision to use PTFE tubing for a Prusa i3 MK3S printer ultimately depends on the user's specific requirements and budget. If thermal and chemical resistance are top priorities, and the user is willing to invest in a more expensive tubing material, PTFE tubing can offer significant benefits for the hot end application. However, if flexibility or cost is a concern, users may want to consider alternative tubing materials.

For users who prioritize thermal and chemical resistance and have the budget for it, we recommend purchasing the 44.3mm pack of PTFE tubing for their Prusa i3 MK3S printer. However, for those who value flexibility or have cost concerns, alternative tubing materials such as PLA or PETG may be a more suitable choice.

part # bof3d105 prices

• $15.44-$42.24

specifications buildoffal:

• brand: Bundle Of Fun
• part type: Tube Printer
• manufacturer part number: BOF3D105

seller buildoffal:

• rating: 96.2%
• # reviews: 1010

payments buildoffal:

• wallet: Paypal
• credit card: Mastercard
• other

general buildoffal:

• Home Improvement > Building Hardware > Other Home Building Hardware
• condition: New

returns buildoffal:

• paid by: Seller
• method: Money back
• time: 30 Days
• policy: Returns Accepted

offer buildoffal:

• quantity: 1
• options: Ship-to-home
• started: December 7, 2025
• sold: 0
• availability: In Stock

shipping buildoffal:

• class: Economy
• cost: $0.00
• service: Economy
• transit: 4-10 Days
• type: Fixed

Bundle Of Fun BOF3D105 Is Similar To:

• Midwest Products 4044 Basswood Strip Bundle 0.125x 0.125 X 24 Inch Pack Of 20 (23.5% similar) $10.62–$29.89. (April 8th, 2025)