NATIONAL HARDWARE N800-009 Joist 1219BC-2X5H 886780027006 9-1/2

( Brand: National Hardware ), ( Model: 1219BC-2X5H ), ( Type: Structural Hardware ), ( Manufacturer Part Number: N800-009 ), ( UPC: 886780027006 )

Review NATIONAL HARDWARE Inch 9-1/2 Decorative Joist Black

The National N800-009 1219BC-2x5H 9-1/2" joist is a high-performance building component specifically designed for use as a structural support element in residential and light commercial construction projects. This joist, manufactured by National Metal Corporation, features a unique double-hat section profile that provides increased strength and efficiency compared to traditional solid lumber or single-hat section engineered joists.

The N800-009 joist is 12 feet in length with a width of 9-1/2 inches and an overall height of 5 inches. The "2x5H" notation indicates that each joist consists of two vertical legs, each 5 inches in height. The hat-section profile in the middle of these legs enhances both the joist's strength and its ability to support concentrated loads.

These joists possess a number of advantages over traditional lumber or other joist options. They are made of tough, corrosion-resistant galvanized steel, ensuring a long lifespan and resistance to decay and pest damage. The steel composition also makes these joists better suited for areas prone to moisture, such as basements or crawlspaces, where they provide additional structural stability and durability.

Additionally, these steel joists contribute to energy efficiency by maintaining a consistent temperature and reducing heat loss. They allow for larger, more open floor plans by eliminating the need for load-bearing walls for support. In turn, this leads to increased usable space and more natural light in a building.

Fabricated with precision engineering, the N800-009 1219BC-2x5H 9-1/2" galvanized steel joist is specifically designed to meet or exceed industry standards for strength, durability, and structural performance. Installation is streamlined, as these joists come pre-engineered with various hole configurations for both web and end bearing connections. This makes for a faster, more efficient construction process.

Installation is simplified due to the joist's uniform shape and weight, which can be easily handled and maneuvered by even small construction teams. They are also lightweight, making transportation to remote job sites more manageable.

In conclusion, the National N800-009 1219BC-2x5H 9-1/2" galvanized steel joist is an outstanding choice for builders and contractors looking for a high-strength, long-lasting, and flexible building solution. Its unique, corrosion-resistant double-hat section design not only offers increased strength but also enables design flexibility and improved overall efficiency in residential and light commercial construction.

Pros and Cons of Buying National N800-009 1219bc-2x5H 9-1/2 Joist

National N800-009 1219bc-2x5H 9-1/2 Joists are engineered lumber products used in residential and commercial construction for their enhanced strength and stability compared to traditional wooden joists. Here are the pros and cons of investing in these joists:

1. Increased Load Capacity: Engineered joists, like the National N800-009 1219bc-2x5H 9-1/2 Joist, are engineered to provide greater load capacity and allow for longer spans between supports. This reduction in the number of supports required can save on construction costs and time in large projects.

2. Reduced Sag: The engineered design of these joists eliminates the problem of sagging that can occur with wooden joists under heavy loads. The stability and uniformity also lead to a smoother and more even surface, improving the finished look of the built structure.

3. Rot and Insect Resistance: Engineered joists contain no organic materials, making them inherently resistant to rot, decay, and insect infestations. This increased durability translates to a longer lifespan for the joists, reducing the need for replacement and repair.

4. Dimensional Stability: Engineered joists, unlike their wooden counterparts, do not change dimensions due to temperature or moisture content changes. This stability is essential for modern construction techniques and architectural designs that rely on precise, consistent dimensions.

5. Eco-Friendly: The manufacturing process for engineered joists involves using less wood, as the materials are engineered for maximum strength and efficiency. Additionally, the precision manufacturing process generates minimal waste compared to traditional cuts of wooden joists.

1. Cost: Engineered joists can be more expensive than traditional wooden joists due to their advanced manufacturing process, enhanced properties, and longer lifespan.

2. Handling and Installation: Engineered joists are typically larger and heavier than wooden joists, requiring additional manpower and tools for handling and installation.

3. Limited Availability: Engineered joists may not be readily available at local supplier stores; builders and contractors may need to order them in advance or source them from specialized suppliers.

4. Complication in Splicing: Splicing engineered joists can be a more involved process than splice wooden joists due to their unique design and materials. This adds to the overall construction cost and time.

The National N800-009 1219bc-2x5H 9-1/2 Joist, like other engineered joists, brings significant advantages to modern construction projects, including increased load capacity, dimensional stability, and reduced sag. Balanced against these benefits are the potential challenges of cost, availability, and handling. After careful consideration of project requirements and available resources, the adoption of engineered joists can lead to a smart investment in construction efficiency and longevity.

If your construction project requires the extra strength, stability, and durability that engineered joists offer, it is highly recommended that you consider incorporating them into your design and budget. To mitigate the potential challenges, carefully plan for their acquisition, handling, and installation, and be prepared to factor the additional cost into your project overall. This investment can yield significant long-term benefits, providing a strong foundation for your construction project.

part # n800009 prices

• $24.47-$41.60

specifications buildoffal:

• brand: National Hardware
• model#: 1219BC-2X5H
• type: Structural Hardware
• manufacturer part number: N800-009
• upc: 886780027006

returns buildoffal:

• method: Money back
• policy: Returns Accepted
• paid by: Buyer
• time: 30 Days

seller buildoffal:

• # reviews: 138150
• rating: 98.4%

shipping buildoffal:

• cost: $0.00
• type: Fixed
• service: Standard
• class: Standard
• transit: 6-11 Days

general buildoffal:

• condition: New
• Home Improvement > Building Hardware > Other Home Building Hardware

payments buildoffal:

• wallet: Paypal
• credit card: Diners-club
• other

offer buildoffal:

• started: December 21, 2024
• options: Ship-to-home
• sold: 0
• quantity: 10
• availability: In Stock

National Hardware N800-009 Is Similar To:

• National Hardware N222-455 Stainless Steel U-bolt 5/16x4-1/4lx1-3/4w Inch 10 Pack (41% similar) $10.84–$122.72. (August 24th, 2024)
• National Mfg/spectrum Brands Hhi N100-333 #3 1-1/2 Inch Zn Ring -n100-333 (37.9% similar) $12.99–$14.99. (August 24th, 2024)
• National Hardware N109-015 V867 Gate Kit - Black (60.9% similar) $24.99–$25.00. (August 24th, 2024)
• National Hardware N270-314 V1996-6x30 6 Inch X 30 Aluminum Kick Plate - Nickel (58.2% similar) $24.99–$83.99. (August 24th, 2024)
• National Mfg/spectrum Brands Hhi N222-217 U Bolt With Plate And Hex Nuts #652 Zinc 3/8 X 3 4-1/2- Inch -n222-217 (28.1% similar) $8.35–$16.50. (August 25th, 2024)
• National Mfg/spectrum Brands Hhi N243-576 Swivel-eye Single Pulley 3/4- Inch -n243-576 (30.1% similar) $5.63–$18.21. (August 26th, 2024)
• National Hardware N262196 N262-196 V1320 Lever Latch In White 1-3/4 Inch (39.5% similar) $33.35–$44.99. (August 27th, 2024)
• National Hardware N225-987 V334 1-1/4 Inch Wedge Door Stop - Pack Of 2 Brown (52.6% similar) $8.71–$18.05. (August 27th, 2024)
• National Diversified Sales Inc-inc. 1700c15 Tru Union Spring Check Valve For Easy Repair And Cleaning - 2 Inch Clear (26.5% similar) $83.18. (August 28th, 2024)
• National N195-800 Hardware 1218bc-3x3.25i 3 Inch X 3-1/4 Decorative - Black (72.3% similar) $20.97–$52.99. (August 30th, 2024)
• National Hardware N240-358 Cold Shut Connecting Link Zinc 5/16 Inch - Quantity (40.5% similar) $19.49–$38.08. (August 31st, 2024)